OC Genie Button
This button is used to auto-overclock for the system. Press this button to enable the
OC Genie function when the system is in power o state, meanwhile, the button will
light and lock. And then the system will automatically detect the optimum values to
overclock after booting the system. To disable the OC Genie function, please press the
button again after power o the system, meanwhile, the button light will o and unlock,
and the system will restore the default for next boot.
Important
Please install the DDR3 1333 and up memory and equip better heat sink/ cooler with
OC Genie function.
We do not guarantee the OC Genie overclocking range and the damages or risks
caused by the OC Genie overclocking behavior.
You can disable the OC Genie function in BIOS setup. And we suggest you to save
the OC Genie conguration to overclocking prole in BIOS for future using.
The usage of OC Genie is at your own risk. Overclocking is never guaranteed by
MSI.
Base Clock Control Buttons
These buttons are used to increase or decrease the Base clock frequency. Pressing
the Plus/ Minus button once will increase/ decrease the Base clock frequency 0.5 MHz
when the system is in regular operation state.
Plus button Minus button
•
•
•
•
To Next Page
Loading...
Need help?
General
