Advanced BIOS Features
Boot Sequence
Press <Enter> to enter the sub-menu.
1st/ 2nd/ 3rd/ --- Boot Device
These items allow you to set the rst/ second/ third boot device where BIOS at-
tempts to load the disk operating system.
Boot From Other Device
Setting the option to [Yes] allows the system to try to boot from other device, if the
system fails to boot from 1st boot device.
BIOS Flash Protection
This function protects the BIOS from accidental corruption by unauthorized users or
computer viruses. When enabled, the BIOS’ data cannot be changed when attempt-
ing to update the BIOS with a Flash utility. To successfully update the BIOS, you will
need to disable this Flash BIOS Protection function. You should enable this function
at all times. The only time when you need to disable it is when you want to update the
BIOS. After updating the BIOS, you should immediately re-enable it to protect it against
viruses.
Full Screen Logo Display
This item enables this system to show the company logo on the boot-up screen. Set-
tings are:
[Enabled] Shows a still image (logo) on the full screen at boot.
[Disabled] Shows the POST messages at boot.
▶
▶
▶
▶
▶
To Next Page
Loading...
Need help?
General
