3-6
BIOS Setup Industrial Computer Board
BIOS Setup Industrial Computer Board
Advanced
Bootup NumLock State
This setting is to set the Num Lock status when the system is powered on. Setting
to [On] will turn on the Num Lock key when the system is powered on. Setting to
[Off] will allow users to use the arrow keys on the numeric keypad.
Full Logo Display
This BIOS feature determines if the BIOS should hide the normal POST mes
-
sages with the motherboard or system manufacturer’s full-screen logo.
When it is enabled, the BIOS will display the full-screen logo during the boot-up
sequence, hiding normal POST messages.
When it is disabled, the BIOS will display the normal POST messages, instead
of the full-screen logo.
Please note that enabling this BIOS feature often adds 2-3 seconds of delay to
the booting sequence. This delay ensures that the logo is displayed for a suf
-
ficient amount of time. Therefore, it is recommended that you disable this BIOS
feature for a faster boot-up time.
Option ROM Messages
This item is used to determine the display mode when an optional ROM is ini
-
tialized during POST. When set to [Force BIOS], the display mode used by AMI
BIOS is used. Select [Keep Current] if you want to use the display mode of op-
tional ROM.
▶
▶
▶
To Next Page
Loading...
Need help?
General
