NAD T 747 User Manual

SOURCE SETUP (TABLE VIEW)
The Source Setup (Table View) reects the settings made in the Source
Setup (Normal View) menu. All the Source settings are summarized and
displayed in tabulated form in the Source Setup (Table View).
Navigating through the Source Setup (Table View) via a combination of [ ] and
then [ ] keys, one will have the benet of directly changing the settings for
“Audio, Video, Preset, Trigger and Name” without going back to the Source Setup
(Normal View) menu. Note that to eect a change in the settings, you have to
press [ENTER]. Toggle [ENTER] also to enable or disable a Source.
ABOUT FIRST TIME SETUP OF NAD T 747
The T 747 includes a high performance video processor that can upscale
Standard Denition (SD) video to High Denition (HD) video. The HD video
is only available on the HDMI (up to 1080p resolution) or Component Video
(up to 1080i resolution only) output.
If you are using an HD capable TV, you should connect either HDMI or
Component Video, not both. All SD sources will be upscaled to HD over
these HD connections. Be sure your TV is HD capable before selecting
an HD resolution. Note that the default SD is backward compatible with
non-HD sets.
For the On Screen Display (OSD) to be shown at your connected TV, set
your T 747 to the Source number that corresponds to your TV’s signal type:
Source 1 : defaulted to HDMI Monitor OUT
Source 2 : defaulted to Component Video Monitor OUT
Source 3 : defaulted to S-Video Monitor OUT
These default settings can be changed, but should be used to get started. It
must be noted from the above that with Source 1 defaulted to HDMI, the OSD
will only be available via HDMI Monitor OUT when at Source 1. Select Source 2
or other enabled Source numbers (except Source 1) for the OSD to be available
at Component Video, S-Video or Video (Composite) Monitor OUT.
iPod SETUP
The iPod Setup menu allows you to preset the following associated
settings when iPod is the selected source:
Enabled: Select “Yes” to default Source 4 to iPod mode or “No” for
Source 4 to be an assignable source input.
Auto Connect: Select “Yes” to automatically enable and connect
the iPod player docked in the linked NAD iPod docking station when
Source 4 (the default iPod source allocation in the T 747) is selected.
Select “No” if you do not want for the iPod connection automatically
connected.
Menu Timeout: Set the time for the OSD to revert to the “Now
Playing” display when the iPod menu has been left idle (no scrolling or
navigation being done) for the specied time out time. For the “Now
Playing” OSD to be shown, there should be a song paused or being
played before going to the iPod menu. You can set the “Menu Timeout”
between the range 5s to 60s at 5s increments. If you do not want for
the menu to timeout, select “O”.
Audiobook Speed: Set the playback speed with the following options
- Normal, Fast and Slow. Note that for “Audiobook Speed” to be available in
the menu, an iPod player must be docked in the linked NAD IPD model.
SPEAKER SETUP
After connecting all ancillary sources and other combinations, the Speaker
Setup menu will guide you on how to manage and setup your speakers in
order to achieve optimum sound acoustics in your listening environment.
The following are the Speaker Setup Menu sections.
OPERATION
USING THE T 747  SETUP MENU
23
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

NAD T 747 Specifications

General

Brand	NAD
Model	T 747
Category	Receiver
Language	English