National Instruments Compact FieldPoint cFP-20 Series User Manual

Chapter 4 LabVIEW RT Programming
© National Instruments Corporation 4-7 cFP-20xx and cFP-BP-x User Manual
Use the Application Path and Launch Application at Boot-up settings to
automatically launch a built LabVIEW RT application when you start up
the cFP-20xx. The LabVIEW RT Engine launches the built application
specified by Application Path when you start up the cFP-20xx. The
specified path also determines the path and application name that appear
when you target LabVIEW RT to the cFP-20xx and create an embedded
LabVIEW RT application. Refer to the Embedding Applications on the
cFP-20xx section and the Launching Embedded Applications at Startup
section for more information about embedding and launching
LabVIEW RT applications on the cFP-20xx.
Select Launch Application at Boot-up to launch the application specified
in Application Path when you start up the cFP-20xx. You must first create
the application using the Application Builder before you select this option.
Refer to the LabVIEW Application Builder Release Notes and to the
LabVIEW Help for more information about the Application Builder.
Refer to the Embedding Applications on the cFP-20xx section for more
information about creating LabVIEW RT applications.

National Instruments Compact FieldPoint cFP-20 Series Specifications

General

Brand	National Instruments
Model	Compact FieldPoint cFP-20 Series
Category	Network Hardware
Language	English