National Instruments Compact FieldPoint cFP-20 Series User Manual

Chapter 5 Accessing cFP-20xx Channels from PC Applications
cFP-20xx and cFP-BP-x User Manual 5-6 ni.com
VIs and applications can browse and read, write, or read/write from the
cFP-20xx. These items also will be accessible in MAX and the FieldPoint
OPC server.
Serial VIs
You can use the LabVIEW Serial VIs to communicate with other serial
devices through the serial port(s) on the cFP-20xx. For more information
about the cFP-20xx serial port(s), refer to the Serial Ports section of
Chapter 3, Feature Descriptions.
TCP and UDP VIs
You can use the LabVIEW TCP VIs to publish data from the cFP-20xx to
computers or devices on the network using TCP-based protocols. You can
use the LabVIEW UDP VIs to publish data from the cFP-20xx to computers
on the network using UDP (User Datagram Protocol).
Note The TCP and UDP VIs provide low-level access to your network. Use them only
when the supplied protocols do not fit into your application.

National Instruments Compact FieldPoint cFP-20 Series Specifications

General

Brand	National Instruments
Model	Compact FieldPoint cFP-20 Series
Category	Network Hardware
Language	English