National Instruments PXI-1042Q User Manual

© National Instruments Corporation B-1 NI PXI-1042 Series User Manual
B
Pinouts
This appendix describes the P1 and P2 connector pinouts for the PXI-1042
Series backplane.
Table B-1 shows the P1 (J1) connector pinout for the System
Controller slot.
Table B-2 shows the P2 (J2) connector pinout for the System
Controller slot.
Table B-3 shows the P1 (J1) connector pinout for the Star Trigger slot.
Table B-4 shows the P2 (J2) connector pinout for the Star Trigger slot.
Table B-5 shows the P1 (J1) connector pinout for the peripheral slots.
Table B-6 shows the P2 (J2) connector pinout for the peripheral slots.
Note PXI signals are shown in boldface.
For more detailed information, refer to the PXI Specification, Revision 2.0.
Contact the PXI Systems Alliance for a copy of the specification.

National Instruments PXI-1042Q Specifications

General

Brand	National Instruments
Model	PXI-1042Q
Category	Chassis
Language	English