4
IMPORTANT ITEMS
Keep your robot away from liquids and wet
areas. Move or cover pet bowls and plant trays.
Clear the area of small items like toys and
clothing.
Tie up wires, curtains and other low-hanging
items.
Thick carpet on top stair may affect the
robot’s navigation system (top stair with low-
pile carpet is OK). To make sure your robot
sees the drop, place boundary markers 6
inches/15cm from the edge of the stair.
Keep your Neato inside the house. It was not
designed for outdoor cleaning or freezing
temperatures.
In MANUAL Clean, the only active sensors are
the front drop sensors. Because you direct
the robot yourself, you can run it into things
without the robot stopping. Be careful if you
drive the robot backwards as it could fall off of
your stairs or cliff if you don’t stop it.
Tips
To keep your robot out of places you don’t
want it to go, set down boundary markers
included in the package.
You can use scissors to cut boundary markers
to a shorter length.
You can use removable tape such as gaffer
tape or painters’ tape to keep boundary
markers flat on the floor.
To put Neato to sleep, press and hold the
button for 2 seconds and the light on the
screen will go off.
To do a Reset of the Neato robot, press and
hold the button for 15 seconds and all the
lights and the screen will turn off. The robot
will automatically turn back on.
The combo brush offers superior pick-up
of pet hair, reduced noise during operation,
and is ideal for homes with multiple types of
flooring.
The spiral blade brush offers superior cleaning
performance across all floor surfaces.
If you do not plan to use your Neato for an
extended period, push the power switch
inside the dirt bin UP to power it off.
Shiny surfaces and black floors might cause
navigation issues.
Important Items and Tips
To Next Page
Loading...
Need help?
General
Weight and Dimensions
