5
6
Start Button & LED Lights
English
ROBOT IS: LED COLOR WHAT IT MEANS
Cleaning
Solid Green Battery level is normal
Solid Yellow Battery level is low and must be charged before a new
cleaning can be started
Solid Red Battery level is low and robot must return to charge base
Charging
Green (Solid
or pulsing)
Battery is charging and robot can start cleaning
Pulsing
Yellow
Battery is fast-charging and must complete before
cleaning can start
Pulsing Red Battery level is low and must be charged before a new
cleaning can be started
LED COLOR WHAT IT MEANS
Soft Glowing Blue
Robot is in Pairing Mode
Fast Blinking Blue*
Pairing to Neato app/account
Fast Blinking Red
Error Connecting
Solid Blue
Pairing Successful
No Light Robot Oine – please connect to access additional features
BATTERY LED
WI-FI LED
*if you’ve already paired, Fast Blinking Blue means the robot has lost connection . The robot
could be out of range, your Wi-Fi network may be down, or another Wi-Fi issue maybe have
occurred. If out of range, the robot will automatically reconnect when it comes back within
range. Otherwise, check your router to make sure it’s operating normally.
ACTION HOUSE CLEAN LED SPOT CLEAN LED
Start
Cleaning
Press Start Button 1x for
house cleaning
Solid Blue
Press Start Button 2x for
spot cleaning
Solid Blue
Pause/
Resume
Cleaning
Press Start Button during
cleaning to pause robot.
Pulses while paused
in House Clean
Pulses while paused in
Spot Clean
Press Start Button again
to resume cleaning
Solid Blue Solid Blue
Cancel
Cleaning
(When
Paused)
Press & hold Start Button
for 5 seconds to cancel
cleaning
Robot & LEDs turn o
& robot plays a tone
Robot & LEDs turn o
& robot plays a tone
HOUSE CLEAN and SPOT CLEAN LEDs
* NOTE: if LED light is Blinking Red or Solid Red, your robot needs robot maintenance or
your robot has a navigation issue. Please check the troubleshooting section of this guide.
Start Button & LED Lights
HOUSE CLEANING
In normal operation, Neato comes o of
its base, explores its surroundings and
starts cleaning. It starts cleaning in sections
approximately 15’x15’ depending on layout
and furniture in the room. It will continue to
clean section by section until the entire area is
cleaned.
Your Neato robot will also try to clean one
room fully before moving on to the next,
assuming it can detect your doorways. If it
cleans a partial room, your Neato robot will
come back to finish the room before finishing
the complete job.
AUTO CHARGE AND RESUME
If the area the Neato robot is attempting
to clean is very large, the robot will return
to its base mid-cleaning to recharge. Once
recharged, it will return to finish where it left
o. A complete cleaning cycle includes 3
cleanings and 2 recharges so that Neato can
clean very large areas on one level.
SINGLE ROOM CLEANING
If you just want to clean a single room, you
can manually place your robot in the room,
press the start button, and close the door.
Your Neato robot will clean the room, and
return to where you originally placed it in the
room. When the robot has finished cleaning,
please put the robot back on its charge base.
MOVING A ROBOT MID-CLEANING
It is not recommended to pick up your robot
and move it mid-cleaning. It can become
disoriented, not follow its normal smart
behavior, and have diculty finding its charge
base. If you pick up your robot, put it back
down within 1 foot of where you picked
it up for best results.
How Neato Works
To Next Page
Loading...
Need help?
General
Weight and Dimensions
