EasyManuals Logo
Home>NEC>Monitor>MultiSync EA275WMi

NEC MultiSync EA275WMi User Manual

NEC MultiSync EA275WMi
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
English-10
Mount Flexible Arm
This LCD monitor is designed for use with a fl exible arm.
1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand.
2. Use the 4 screws removed from the stand to attach the arm to the monitor (Figure F.1).
Caution: Use ONLY the screws (4 pcs) that were removed from the stand to avoid damage to the monitor or stand. To meet
the safety requirements, the monitor must be mounted to an arm which guaranties the necessary stability under
consideration of the weight of the monitor. The LCD monitor should only be used with an approved arm
(e.g. GS mark).
NOTE: Tighten all screws (recommended Fasten Force: 98 - 137N•cm).
Figure F.1
Weight of LCD assembly: 5.8 kg (EA275WMi)
7.8 kg (EA305WMi)
100 mm
100 mm
Thickness of Bracket (Arm)
2.0~3.2 mm
12 mm
Additional VESA Holes for Lower Monitor Head Position
Additional 4 VESA holes are provided for those users needing a lower monitor head position than that is available from the
monitor stand in shipping confi guration. The monitor stand can be re-attached by using the 4 screws to the lower position VESA
holes.
NOTE: 1. The monitor head tilt function may experience impaired operation when attached to the lower position VESA holes.
2. The monitor head pivot function should not be used when attached to the lower position VESA holes.
4 Screws (M4) Additional 4 VESA

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC MultiSync EA275WMi and is the answer not in the manual?

NEC MultiSync EA275WMi Specifications

General IconGeneral
3DNo
Panel typeAH-IPS
Pixel pitch0.265 x 0.265 mm
Aspect ratio16:9
Screen shapeFlat
Pixel density109 ppi
Response time6 ms
Backlight typeW-LED
Composite syncYes
Display surface-
Display diagonal27 \
Display technologyLED
Horizontal scan range31.5 - 83 kHz
Viewable size diagonal684.7 mm
Viewable size, vertical335.7 mm
Contrast ratio (dynamic)20000:1
Contrast ratio (typical)1000:1
Display number of colors16.78 million colors
Viewable size, horizontal596.7 mm
Digital vertical frequency56 - 75 Hz
Digital horizontal frequency31.5 - 91 kHz
Display brightness (typical)350 cd/m²
Supported graphics resolutions640 x 480 (VGA), 720 x 400, 800 x 600 (SVGA), 832 x 624, 1024 x 768 (XGA), 1152 x 870, 1280 x 1024 (SXGA), 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+), 1920 x 1080 (HD 1080), 2560 x 1440
USB hub version3.2 Gen 1 (3.1 Gen 1)
DVI-I ports quantity1
Headphone connectivity3.5 mm
VGA (D-Sub) ports quantity0
USB Type-A downstream ports quantity3
Height adjustment130 mm
Panel mounting interface100 x 100 mm
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Annual energy consumption60 kWh
Power consumption (standby)0.44 W
Power consumption (typical)57 W
Operating altitude0 - 5000 m
Non-operating altitude0 - 12192 m
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)5 - 35 °C
Storage relative humidity (H-H)10 - 85 %
Operating relative humidity (H-H)20 - 80 %
Sustainability certificatesENERGY STAR
CertificationTCO, RoHS
Product colorBlack
Cables includedAC, DisplayPort, USB
RMS rated power2 W
Number of speakers2
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)230 mm
Width (with stand)369.2 mm
Height (with stand)417.9 mm
Weight (with stand)8700 g
Depth (without stand)72 mm
Width (without stand)639.2 mm
Height (without stand)377.8 mm
Weight (without stand)5800 g

Related product manuals