English−38
OSD (On-Screen-Display) Controls
NOTE: Some functions may not be available depending on the model or optional equipment.
Goto Adjustment
Select
Return Close
MULTI-INPUT OPTION C MODULE
PICTURE:
PICTURE MODE
EMULATION
6 AXIS COLOR TRIM
PICTURE SETTINGS
SHARPNESS
UHD UPSCALING
ADJUST
COLOR SYSTEM
INPUT RESOLUTION
ASPECT
ADVANCED
ROTATION
SPECTRAVIEW ENGINE
RESET
PICTURE MODE 5
PRESET Programmable
3D LUT EMU. MySetting-1
LUMINANCE 400 cd/m
2
BLACK 0.5 cd/m
2
GAMMA Custom
CUSTOM VALUE 2.2
WHITE 10000 K
x: 0.279 y: 0.292
RED x: 0.642 y: 0.332
GREEN x: 0.307 y: 0.602
BLUE x: 0.153 y: 0.053
*
Input source
Main Menu Icons
Main Menu Item
Sub Menu
Key Guide
Adjustment Settings
*: This menu is only available
when the optional
Raspberry Pi Compute
Module Interface Board
and Raspberry Pi Compute
Module are installed.
Remote Control
Press or
to navigate to a
sub-menu.
Press SET/POINT
ZOOM to select an
option.
Press or , + or –
to select the function or
setting to be adjusted.
Press MENU or EXIT.
Control Panel
Press INPUT/SET to select an option. Press MENU/EXIT
Press + or –, r or s to select the
function or setting to be adjusted.
To Next Page
Loading...
Need help?
General