English−14
Installing and Removing the Optional Table Top Stand
CAUTION: • Installing and removing the stand must be done by two or more people.
• When installing the monitor stand, handle the unit with care to avoid pinching your fingers.
For installation, follow the instructions included with the stand or mounting equipment. Use only those devices recommended by
the manufacturer.
NOTE: • ONLY use thumbscrews which are included in the monitor.
• Install the stand so the long end of the feet face forward. Use the ST-5220.
Soft cloth
Optional table top stand
Table
Prevent Tipping
CAUTION:
When using the monitor with the optional table top stand, fasten the monitor to a wall using a cord or chain that can support
the weight of the monitor in order to prevent the monitor from falling. Fasten the cord or chain to the monitor using the provided
clamps and screws.
Screw (M4)
Cord or chain
Clamp
Screw Holes
325.9 mm
Before attaching the monitor to the wall, make sure that the wall can support the weight of the monitor.
CAUTION: Be sure to remove the cord or chain from the wall before moving the monitor.
To Next Page
Loading...
Need help?
General
