Page 4 of 10
Service: 604 -856- 9155
Email: service@natg.ca
Online System Programming
IMPORTANT NOTE: Webpro gives you access directly in to your phone system to make changes. PLEASE DO NOT change
anything that is not listed in this user guide. Doing so may result in mistaken changes to your phone system which could
result in a BILLABLE service call if our tech if needs to fix what has been changed.
Logging in to Web Pro:
1. Using the Internet, in the address bar, type in IP Address: [previously provided by NATG]
2. Enter User Name: [user name as previously provided by NATG]
3. Enter Password: [password as previously provided by NATG]
4. Press Enter OR Click
Changing the Name of a Set:
1. Log in to Web Pro
2. Click System Data
3. Click
4. Click
5. Click the drop down arrow and choose the extension you’d like to change
6. Key in the New Name
7. Click Apply
8. Click Home
9. Logout when finished
System Speed Dials:
1. Log in to Web Pro
2. Click System Data
3. Click
4. Click
5. Choose the speed dial number you would like to enter or click to scroll through keys of Speed Dials
6. Enter Phone Number (with NO 9
infront & no dashes)
7. Enter the Name (up to 12 characters)
8. Leave the rest as is
9. Enter the Next Speed Dial or if
finished, Click Apply
10. Click Home , Click Logout
To Next Page
Loading...
Need help?
General