NetComm N300 User Manual

YML15WN ADSL2+/3G Wireless N300 4-Port Modem Router
www.netcomm.com.au 13
NetComm Gateway Series - ADSL2+/3G Wireless N300 4-Port Modem Router
Default settings
LAN (Management)
Static IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
WAN (Internet)
WAN mode: DHCP
Wireless
SSID: NetComm Wireless
Channel: auto
Security: WEP, 64bit
WEP Key: a1b2c3d4e5
Interface Access
Username: admin
Password: admin
Restore Factory Default Settings
Restoring factory defaults will reset the 3G15Wn to its factory default conguration. Occasions may present themselves where you need to
restore the factory defaults on your 3G15Wn such as:
• You have lost your username and password and are unable to login to your 3G15Wn’s web conguration page;
• You have purchased your 3G15Wn from someone else and need to recongure the device to work with your ISP;
• You are asked to perform a factory reset by NetComm Support staff
In order to restore your 3G15Wn to its factory default settings, please follow these steps:
• Ensure that your 3G15Wn is powered on (for at least 10 seconds);
• Use a paper clip or a pencil tip to depress the reset button for ten seconds and release. At this point, the reset is in progress. Do not
power off the unit at this point;
• When indicator lights return to steady green, reset is complete. The default settings are now restored. The entire process takes
about 45 seconds to complete;
• Once you have reset your 3G15Wn to its default settings you will be able to access the device’s conguration web interface using
http://192.168.1.1 with username ‘admin’ and password ‘admin’;
Connecting the 3G15Wn
300Mbps Wireless Link
LAN 1 LAN 2 LAN 3 LAN 4
3G Tower
3G15Wn
3G USB Modem
ADSL2+
Telephone
Exchange

NetComm N300 Specifications

General

Brand	NetComm
Model	N300
Category	Wireless Router
Language	English