Wireless Bridge
Wireless Bridge allows you to configure the router’s access point as a bridge.
Select the mode for the Wireless Access Point built into the NB604N. When selecting ‘Wireless Bridge’ mode, you can also specifiy
which wireless networks will be allowed to connect to the NB604N by using the ‘Bridge Restrict’ option and then entering the
applicable MAC Addresses of the other wireless access points.
Click Apply/Save to save the new wireless bridge configuration settings.
Advanced
Advanced Wireless allows you to configure detailed wireless network settings such as the band, channel, bandwidth, transmit
power and preamble settings.
Click Apply/Save to save any changes to the wireless network settings configuration.
Station Info
This page shows the MAC address of authenticated wireless stations that are connected to the NB340N and their status
To Next Page
Loading...
Need help?
General
