NetComm NP505 User Manual

NetComm
Wireless
This quick start guide is designed to get you up and running quickly
with your new device. More advanced set up instructions can be found
in the user manual which can be downloaded from
www.netcommwireless.com
SETTING UP YOUR POWERLINE
ADAPTERS
1 2
3
Router
1. Using one of the supplied Ethernet cables connect one end into the
LAN Ethernet port of your modem/router.
2. Connect the other end of the same cable into one of the
Powerline adapters.
3. Connect the Powerline adapter to a power point near your
modem/router.
NOTE: For best performance plug your Powerline adapters directly into the wall.
Only connect to a powerboard as a last resort as this will reduce performance.

NetComm NP505 Specifications

Power

power supply voltage	AC 220-240V
power supply frequency	50-60Hz

Data Transfer and Range

data transfer rate	Up to 500 Mbps over Powerline
range	Up to 200 m over Powerline

Operating Environment

operating temperature	0°C to 40°C
non-operating temperature	-25°C to 70°C
operating humidity	30% to 80% Relative Humidity
non-operating humidity	30% to 95% Relative Humidity

Weight and Dimensions

dimensions	62 mm x 116 mm x 42 mm
weight	200 g