NetComm Wireless 4G M2M Router
Advanced configuration
The NTC-140-02router comes with pre-configured settings that should suit most customers. For advanced configuration, log in to
the web-based user interface of the router.
To log in to the web-based user interface:
1.
Open a web browser (e.g. Internet Explorer®, Mozilla Firefox® or Google Chrome™.™.), type http://192.168.1.1 into the
address bar and press Enter. The web-based user interface log in screen is displayed.
Figure 12 – Log in prompt for the web-based user interface
2.
Enter the login username and password. If this is the first time you are logging in or you have not previously configured the
password for the “root” or “admin” accounts, you can use one of the default account details to log in.
Table 8 - Management account login details – Root manager
Table 9 - Management account login details – Admin manager
Note:
The admin manager account allows you to manage all settings of the router except functions such as firmware upgrade,
device configuration backup and restore and reset to factory default settings, which are privileged only to the root manager
account.
For security reasons, we highly recommend that you change the passwords for the root and admin accounts upon initial
installation. You can do so by navigating to the System and then Administration page.
The Status page is displayed when you have successfully logged in.
To Next Page
Loading...
Need help?
General
