Default Settings and Technical Specifications A-1
v1.0, September 2009
Appendix A
Default Settings and Technical Specifications
Factory Default Settings
You can return the gateway to its factory settings. On the bottom of the gateway, press and hold the
Restore Factory Settings button
for over 7 seconds. The gateway resets, and returns to its
factory settings.
Your device will return to the factory configuration settings shown in the
following table.
Gateway Login
User login URL http://192.168.1.1
User name and password (case
sensitive)
admin/password
Local Network (LAN)
LAN IP 192.168.0.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP starting IP address 192.168.0.10
DHCP Ending IP address 192.168.0.19
Firewall
Inbound communication from the Internet Disabled (except traffic on port 80, the http port)
Outbound communication to the Internet Enabled (all)
Source MAC filtering Disabled
Internet Connection
WAN MAC address Use default hardware address
WAN MTU size 1500
To Next Page
Loading...
Need help?
General