NETGEAR Orbi RBK753 User Manual

Factory settings
You can return your Orbi router or satellite to its factory settings. Use the end of a paper
clip or a similar object to press and hold the Reset button on the back of the router or
satellite for at least seven seconds until the router or satellite LED blinks. The router or
satellite resets, and returns to the factory settings.
Factory settings for Orbi router model RBR750
The following table shows the factory default settings for Orbi router model RBR750.
Table 6. Factory default settings for Orbi router model RBR750
Default SettingFeature
Router login
orbilogin.comUser login URL
adminUser name (case-sensitive)
passwordLogin password (case-sensitive)
Internet connection
Use default hardware addressWAN MAC address
1500WAN MTU size
AutosensingPort speed
Local network (LAN)
192.168.1.1LAN IP
255.255.255.0Subnet mask
EnabledDHCP server
192.168.1.2 to 192.168.1.254DHCP range
192.168.1.2DHCP starting IP address
192.168.1.254DHCP ending IP address
DisabledDMZ
User Manual128Supplemental Information
Orbi Whole Home Tri-Band Mesh WiFi 6 System

NETGEAR Orbi RBK753 Specifications

General

Model	RBK753
Type	Mesh WiFi System
WiFi Technology	WiFi 6 (802.11ax)
Coverage	Up to 7, 500 sq. ft.
Number of Units	3 (1 Router + 2 Satellites)
Compatibility	Works with any internet service provider
MU-MIMO	Yes
Beamforming	Yes
Frequency Band	2.4GHz, 5GHz
USB Port	No
Processor	Quad-Core 1.4 GHz
Memory	512MB NAND Flash and 512MB RAM
Security	WPA2/WPA3
Parental Controls	Circle Smart Parental Controls
Antenna Type	Internal
Dimensions (Router)	9.1 x 7.2 x 2.8 inches
Dimensions (Satellite)	9.1 x 7.2 x 2.8 inches