NETGEAR Orbi RBK753 User Manual

Edit a reserved IP address
To edit a reserved address entry:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5. Select the radio button next to the reserved address.
6. Click the Edit button.
The Address Reservation page displays.
7. Change the settings.
8. Click the Apply button.
Your settings are saved.
Delete a reserved IP address entry
To delete a reserved address entry:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
User Manual64Specify Network Settings
Orbi Whole Home Tri-Band Mesh WiFi 6 System

NETGEAR Orbi RBK753 Specifications

General

Model	RBK753
Type	Mesh WiFi System
WiFi Technology	WiFi 6 (802.11ax)
Coverage	Up to 7, 500 sq. ft.
Number of Units	3 (1 Router + 2 Satellites)
Compatibility	Works with any internet service provider
MU-MIMO	Yes
Beamforming	Yes
Frequency Band	2.4GHz, 5GHz
USB Port	No
Processor	Quad-Core 1.4 GHz
Memory	512MB NAND Flash and 512MB RAM
Security	WPA2/WPA3
Parental Controls	Circle Smart Parental Controls
Antenna Type	Internal
Dimensions (Router)	9.1 x 7.2 x 2.8 inches
Dimensions (Satellite)	9.1 x 7.2 x 2.8 inches