(Continued)
DescriptionField
Enter a value from 0 to 7.Priority
Select the check box for a wired Ethernet port.
If your device is connected to an Ethernet port on the router, select the Ethernet port check box that
corresponds to the Ethernet port on the router to which the device is connected.
You must select at least one Ethernet port. You can select more than one port.
9. Click the Add button.
The VLAN tag group is added.
10. Click the Apply button.
Your settings are saved.
Get Multi-Gig Internet with Internet port
aggregation
To get multi-gig Internet with your Orbi router, set up Internet port aggregation (also
called WAN link aggregation) by aggregating the Internet port and Ethernet port 1 on
the Orbi router.
To set up Internet port aggregation, you need the following:
•
A service provider that offers an Internet speed that's over 1 Gbps.
•
A modem that supports an Internet speed that’s over 1 Gbps and Internet port
aggregation.
To set up Internet port aggregation:
1. Set up Internet port aggregation on your modem.
For information about how to set up Internet port aggregation on your modem, see
the documentation that came with your modem.
2. Log in to your router and enable Internet port aggregation:
a.
Launch a web browser from a computer or mobile device that is connected to
the Orbi network.
b. Enter orbilogin.com.
A login window opens.
User Manual77Specify Network Settings
Orbi Whole Home Tri-Band Mesh WiFi 6 System
To Next Page
Loading...
Need help?
General
