5. In the Internet Port pane, click the Connection Status button.
The Connection Status window opens and displays the following information
•
IP Address: The IP address that is assigned to the router.
•
Subnet Mask: The subnet mask that is assigned to the router.
•
Default Gateway: The IP address for the default gateway that the router
communicates with.
•
DHCP Server: The IP address for the Dynamic Host Configuration Protocol server
that provides the TCP/IP configuration for all the computers that are connected
to the router.
•
DNS Server: The IP address of the Domain Name Service server that provides
translation of network names to IP addresses.
•
Lease Obtained: The date and time when the lease was obtained.
•
Lease Expires: The date and time that the lease expires.
6.
To return the status of all items to 0, click the Release button.
7.
To refresh the page, click the Renew button.
8. To exit the page, click the Close Window button.
View satellites, WiFi devices, and wired
devices connected to the Orbi network
You can view all satellites, WiFi devices, and wired devices that are connected to your
Orbi network.
To view devices connected to your network:
1.
In the Connected Satellites section, find your satellite’s IP address.
2. Select Attached Devices.
The Attached Devices page displays.
The Wired Devices table displays the following information:
•
Device Name: The device model, name, type, and IP address.
•
IP Address: The device IP address. The device’s IP address can change because
the router assigns an IP address to each device when it joins the network.
•
MAC Address: The device MAC address. The unique MAC address for each
device does not change.
User Manual129Manage and Monitor Your Orbi
Pro System
Orbi Pro Router Model SRR60 and Orbi Pro Satellite Model SRS60
To Next Page
Loading...
Need help?
General
