NETGEAR SRK60B04 User Manual

3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > VPN Service.
The VPN Service page displays.
5. Select the Enable VPN Service radio button.
6. Scroll down to the Clients will use this VPN connection to access section, and select
the Home Network only radio button.
This is the default setting. The VPN connection is only to your business network, not
to the Internet service for your business network.
7. Click the Apply button.
Your settings are saved.
8.
Click the FOR WINDOWS or FOR MAC0SX button and download the configuration
files for your VPN clients.
9.
Unzip the configuration files and copy them to the folder where the VPN client is
installed on your device.
For a client device with Windows 64-bit system, the VPN client is installed at
C:\Programfiles\OpenVPN\config\ by default.
Use a VPN tunnel to access your Internet service at your
business
To access your Internet service:
1. Set up the router to allow VPN access to your Internet service.
See Specify VPN service in the router on page 151.
2. On your computer, launch the OpenVPN application.
The OpenVPN icon displays in the Windows taskbar.
3. Right-click the icon and select Connect.
4. When the VPN connection is established, launch your Internet browser.
User Manual161Use VPN to Access Your Network
Orbi Pro Router Model SRR60 and Orbi Pro Satellite Model SRS60

NETGEAR SRK60B04 Specifications

General

Brand	NETGEAR
Model	SRK60B04
Category	Network Router
Language	English