NETGEAR SRK60B04 User Manual

Add satellites to your network using the router web interface
You can use the router web interface to add a satellite to your Orbi network.
To add a satellite to your Orbi network using the router web interface:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
If your browser does not display a login window but displays a security warning and
does not let you proceed, see Resolve a browser security warning on page 27.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Add Orbi Pro Satellite.
The Place Your Satellite page displays.
5. Follow the instructions about where to place your satellite at your location.
6. Connect the satellite to a power source.
7.
If the Power LED on the back of the satellite does not light, press the Power On/Off
button.
8. Click the NEXT button.
9.
Wait about two minutes for the satellite’s ring LED to light solid white.
10. Press the Sync button on the satellite.
The satellite’s ring LED pulses white.
11.
Click the SYNC button in the router web interface.
The router attempts to sync with the satellite.
User Manual20Overview
Orbi Pro Router Model SRR60 and Orbi Pro Satellite Model SRS60

NETGEAR SRK60B04 Specifications

General

Brand	NETGEAR
Model	SRK60B04
Category	Network Router
Language	English