3
1 General notes
Pneumatic linear vibrators of series
NTS are partly completed machineries
and comply with the EC-machine
regulation 2006/42/EG. In particular,
standards DIN EN ISO 12100, part 1
and 2 have been observed.
The vibrators generate directed linear
vibrations or shaking movements.
General areas of application are:
loosening, conveying, compacting as
well as separating of bulk materials
and reducing of friction.
NTS - vibrators are used to empty
bunkers, to drive conveyor troughs,
sieves and vibrating tables.
Applications in the food industry as
well as in wet environments are also
possible, when complying with the
operating instructions of the operating
company.
The drive medium is compressed air
or nitrogen.
NTS vibrators may be operated in
dusty or wet environments.
Operation without silencer should be
avoided in order to protect the
environment against high noise.
2 Technical Data
Drive medium:
Clean (5 µm filter) compressed air or nitrogen
Unfiltered air or nitrogen will cause damage to the vibrators.
Operating pressure:
2 bar to 6 bar*
Operating pressures must not be exceeded or fallen short of
Ambient temperature:
5°C to 60° C*
Operating temperatures must not be exceeded or fallen short of.
Lubrication:
If advised by application engineers of Netter GmbH and in compliance
with locally specified conditions, vibrators of group 1 may be operated
without oil. (Exception 1: In case of freeze-dried air and under extreme
ambient conditions, Exception 2: NTS 21/04).
Units of group 2 and the NTS 21/04 must only be operated with
lubricated compressed air or lubricated nitrogen.
*) Higher operating pressures and temperatures are only permitted after consultation and written confirmation by
application engineers of Netter GmbH.
To Next Page
Loading...
Need help?
General
