0-1
TO THE OWNER
This manual contains information concerning the adjustment and maintenance of your New Holland Models 615,
616 and 617 Disc Mowers. You have purchased a dependable machine, but only by proper care and operation
can you expect to receive the performance and long service built into this disc mower. Please have all operators
read this manual carefully and keep it available for ready reference.
Your New Holland dealer will instruct you in the general operation of your disc mower. (Refer to the “Delivery
Report” at the back of this manual.) Your dealer’s staff of factory-trained service technicians will be glad to answer
any questions that may arise regarding the operation of your disc mower.
Your New Holland dealer carries a complete line of genuine New Holland service parts. These parts are
manufactured and carefully inspected to insure high quality and accurate fitting of any necessary replacement
parts. Be prepared to give your dealer the model and PIN of the disc mower, when ordering parts. Locate these
numbers now and record them below. Refer to the “General Information” section of this manual for the location
of the model and PIN of your disc mower.
Model
Product Identification Number (PIN)
WARNING
This safety alert symbol indicates important safety messages in this manual. When you see this symbol,
carefully read the message that follows and be alert to the possibility of personal injury or death.
WARNING
Pictures in this manual may show protective shielding open or removed to better illustrate a particular
feature or adjustment.
Be certain, however, to close or replace all shielding before operating the machine.
IMPROVEMENTS
CNH America LLC is continually striving to improve its products. We reserve the right to make improvements or
changes when it becomes practical and possible to do so, without incurring any obligation to make changes or
additions to the equipment sold previously.
To Next Page
Loading...
Need help?
General
