28
Table of contents: page
1 Warnings 29
2 Product description and applications 30
2.1 Operating limits 30
2.2 Typical system 32
2.3 List of cables 32
3 Installation 33
3.1 Preliminary checks 33
3.2 Installation of the gearmotor 33
3.3 Fixing of the limit switch bracket on
versions with inductive limit switch 34
3.4 Installation of the various devices 35
3.5 Electrical connections 35
3.6 Description of the electrical connections 36
4 Final checks and start up 36
4.1 Choosing the direction 36
4.2 Power supply connection 36
4.3 Device self-learning 36
4.4 Leaf length self-learning 37
4.5 Checking gate movements 37
4.6 Preset functions 37
4.7 Radio receiver 37
5 Testing and commissioning 37
5.1 Testing 38
5.2 Commissioning 38
6 Maintenance and Disposal 38
6.1 Maintenance 38
6.2 Disposal 38
7 Additional information 39
7.1 Programming keys 39
7.2 Programming 39
7.2.1 Level one functions (ON-OFF functions) 39
7.2.2 Level one programming
(ON-OFF functions) 40
7.2.3 Level two functions
(adjustable parameters) 40
7.2.4 Level two programming
(adjustable parameters) 41
7.2.5 Level one programming example
(ON-OFF functions) 42
7.2.6 Level two programming example
(adjustable parameters) 42
7.3 Adding or removing devices 42
7.3.1 BlueBUS 42
7.3.2 STOP input 43
7.3.3 Photocells 43
7.3.4 FT210B Photo-sensor 43
7.3.5 RUN in “Slave” mode 44
7.3.6 Self-learning Other Devices 45
7.4 Special functions 45
7.4.1 “Always open” Function 45
7.4.2 “Move anyway” function 45
7.4.3 Heating and cooling control system 45
7.4.4 Maintenance warning 45
7.5 Connection of Other Devices 46
7.6 Troubleshooting 47
7.6.1 Malfunctions archive 47
7.7 Diagnostics and signals 47
7.7.1 Flashing light signalling 48
7.7.2 Signals on the control unit 48
7.8 Accessories 49
7.8.1 Remote programming unit 49
8 Technical characteristics 50
Instructions and Warnings for users of
RUN gearmotor 51
CE Declaration of Conformity 53
EN
To Next Page
Loading...
Need help?
General
