English – 5
2
APPLICATION LIMITS
Check that all the values shown in Section 12 - Product technical specifications and estimated durability (paragraph 2.1) are compatible with
the intended use.
2.1 - Product durability
Durability is the average economic life span of the product; its value is strongly influenced by the index of severity of the manoeuvres. To estimate
durability, proceed as described below:
01. Add up the values for the items in Table 1
based on the chosen barrier mechanism
model:
TABLE 1
SEVERITY INDEX
WIDE S WIDE M WIDE L
Jointed boom / 15% /
Presence of dust and sand 10% 10% 10%
Presence of Salinity 10% 10% 10%
Aluminium skirt 5% 5% 5%
Mobile support / 15% 15%
Ambient temperature above 40°C or below 0°C 5% 5% 5%
Operation interrupted by photocell 10% 15% 15%
Operation interrupted by Stop 10% 15% 15%
Speed setting (trimmer FL) above 50% 10% 10% 15%
Force setting (trimmer I) above 50% 5% 10% 10%
02. Depending on the chosen barrier mech-
anism model, proceed as follows on the
graph:
a - using the value found above, draw a
vertical line until it crosses the curve
b - from this point draw a horizontal line
until it crosses the line of “manoeuvre cy-
cles”
The obtained value is the estimated life
span of your product
0
100.000
200.000
300.000
cicli di manovre
400.000
500.000
10 20 30 40 50
60 70 80 90 100
Severity index (%)
manoeuvre cycles
List of available accessories:
XBA19 - aluminium boom painted white L4000 mm
XBA5 - aluminium boom painted white L5150 mm
XBA14 - aluminium boom painted white L4150 mm
XBA15 - aluminium boom painted white L3150 mm
XBA4 - Boom lights WIDE S / WIDE M
XBA6 - Boom lights WIDE L
XBA18 - Boom lights WIDE L
XBA9 - Universal joint
SIA1 - Foundation plate WIDE S / WIDE M
SIA2 - Foundation plate WIDE L
WA12 - Mobile support
WA13 - Aluminium skirt
WIA10 - Pivoting attachment
WIA11 - Jointed boom
PS324 - Emergency batteries
WA10 - Stickers
XBA13 - Rubber impact protection kit
To Next Page
Loading...
Need help?
General
