90
Q
Connect the camera to a television or video recorder for play-
back or recording.
Standard Definition Devices
Before connecting the camera, confirm that the camera video
standard (0 156) matches that used in the TV.
1
Connect the A/V cable.
Turn the camera off and connect the supplied audio/video
(A/V) cable.
2
Tune the television to the video channel.
3
Turn the camera on.
Turn the camera on and press K to view pictures on the TV
(note that the edges of some images may not be displayed).
The camera monitor will remain off; stereo sound recorded
with movies will be played back as monaural sound.
Viewing Pictures on TV
A
Connecting Video Cables
Always turn the camera off before connecting or disconnecting A/V or
HDMI cables. When connecting cables, do not use force or attempt to
insert the connectors at an angle.
A
Video Mode
If no image is displayed, check that camera is connected and that the
correct Video mode (0 156) is selected.
Connect to camera
Video (yellow)
Connect to
video device
Audio (white)
To Next Page
Loading...
Need help?
General
