Name: Nikon COOLPIX L27
Brand: Nikon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

E52

Reference Section

Auto Off

If no operations are performed for a specified amount of time, the monitor turns off and the

camera enters standby mode to save power (A 19).

This setting determines the amount of time that passes before the camera enters standby

mode.

d button M z tab M Auto off M k button

Option Description

Auto off You can select 30 s (default setting), 1 min, 5 min, or 30 min.

Sleep mode

If On (default setting) is selected, the camera enters standby mode when there is

no change in the brightness of the subject, even before the time selected in the

auto off menu has elapsed. The camera enters sleep mode after 30 seconds when

Auto off is set to 1 min or less, or after one minute when Auto off is set to 5 min

or more.

C When the Monitor Has Turned Off to Save Power

• When the camera is in standby mode, the power-on lamp flashes.

• If no operations are performed for approx. another three minutes, the camera turns off

automatically.

• When the power-on lamp is flashing, pressing any of the following buttons turns the monitor back

on:

➝ Power switch, shutter-release button, A button, c button, or b (e movie-record) button

C The Auto Off Setting

• The time that passes before the camera enters standby mode is fixed in the following situations:

- When a menu is displayed: Three minutes

- During slide show playback: Up to 30 minutes

- When the audio/video cable is connected: 30 minutes

• The camera does not enter standby mode while the Eye-Fi card is uploading images.

Questions and Answers:

Need help?

Do you have a question about the Nikon COOLPIX L27 and is the answer not in the manual?

Nikon COOLPIX L27 Specifications

General