E92
Reference Section
Configure the Wi-Fi (wireless LAN) settings to connect the camera and a smart
device.
The Wi-Fi Options Menu
Press the d button M q menu icon M k button
Option Description
Connect to
smart device
Select when wirelessly connecting the camera and a smart
device.
See “Connecting to a Smart Device (Wi-Fi)” (E45) for more
information.
Upload from
camera
Select when wirelessly connecting the camera and a smart
device.
See “Preselecting Images in the Camera That You Want to
Transfer to a Smart Device” (E47) for more information.
• The images to transfer can be selected on the image
selection screen before establishing a Wi-Fi connection
(A56, E88). The SSID and password of the camera are
displayed on the screen after images are selected.
Disable Wi-Fi
Select to terminate the wireless connection between the
camera and a smart device.
See “To Terminate the Wi-Fi Connection” (E46) for more
information.
Options
SSID: Change the SSID. The SSID configured here is displayed
on the smart device. Set a 1- to 24-character alphanumeric
SSID.
Auth./encryp.: Select whether or not to encrypt the
communications between the camera and the connected
smart device.
Communications are not encrypted when Open (default
setting) is selected.
• When WPA2-PSK-AES is set, the message for entering a
password is displayed when the camera is connected to
smart device (E45).
Password: Set an 8- to 16-character alphanumeric password.
Channel: Select the channel used for wireless connections.
Subnet mask: Use the default setting (255.255.255.0) under
normal conditions.
DHCP server IP address: Use the default setting
(192.168.0.10) under normal conditions.
Current settings Display the current settings.
Restore default
settings
Restore the Wi-Fi settings to their default values. The wireless
connection is terminated if this option is performed while Wi-Fi
is connected.
To Next Page
Loading...
Need help?
General
