VBA10401-R.3623.A
- Ａ1 ･ -
Assembly/Adjustment
1. Front body
Mirror unit
・
With being mirror-up as shown right,
assemble the pins and apply C-8008B
（
Adhesive: Super X) on each pin.
#239
#238
#234
#199
#199
#B2231
#236
Do NOT allow the adhesive
to be forced out on the head
of #199.
#119
#236
Apply the adhesive only on
1/4 periphery of the pin on
mount side.
Adhesive:
C-8008B
Adhesive:
C-8008B
Grease: LEN317A
Apply to the inner
diameter where to
put #199 in.
#236
・
NOTE: For undescribed tapes and
sponges in"Assembly" section,
refer to"other tapes/sponges" on
page A44-45 and PARTS LIST.
To Next Page
Loading...
Need help?
General
