Nikon ECLIPSE TE2000-E User Manual

I. Parts of the microscope and their names
6
I. Parts of the microscope and their names
Parts of the microscope can be selected according to your purpose.
Exceptionally, the combination of the lamp, dia-illuminator and the power supply is fixed. Never use these
parts in combination other than specified.
(Refer to page 38 for the correct combination of the lamp, dia-illuminator and the power supply.)
The T-HUBC HUB controller, which mounts on the rear side of the microscope, allows the user to control
attached motorized units. For details, refer to the instruction manual provided with the T-HUBC HUB
controller.
Dia-illuminator
P.13
Eyepiece tube
P. 7
Power supply
P.17
Stage
P.15
Microscope rear
P.16
Microscope base
P. 8
Condenser
P.14
This is a photograph of TE2000-U microscope with T-DH dia-illuminator 100W, LHS-H100P-1 12V100W
lamphouse, 12V100W halogen lamp, TE2-PS100W power supply, T-SR rectangular stage, T-TD
binocular eyepiece tube D, CFI 10X eyepieces, T-N6 sextuple nosepiece, system condenser, objectives,
power cord, etc.

Nikon ECLIPSE TE2000-E Specifications

General

Brand	Nikon
Model	ECLIPSE TE2000-E
Category	Microscope
Language	English