IV. Assembly
54
IV. Assembly
• Before assembling the instrument, read the “ ”, “ ” and “Notes on handling the
microscope” at the beginning of this manual and be sure to follow the warnings and cautions written therein.
• To prevent electric shock and fire, turn off all the power switches of the system and unplug the power cords.
• Be careful not to pinch your hands or fingers during assembly.
• Scratches or fingerprints on lenses will adversely affect the image. Assemble the microscope so as not to put
scratches on the lenses.
• The microscope is a precision optical equipment. Handle carefully and do not subject it to strong shocks. (The
precision of the objectives in particular can be adversely affected even by weak shocks.)
• When using the TE2000-E
• When mounting the T-HUBC HUB controller
on the rear side of the TE-2000U
• When mounting the T-HUBC HUB controller
on the rear side of the TE-2000S
Also refer to the instruction manual supplied
with the T-HUBC HUB controller.
To Next Page
Loading...
Need help?
General
