Nikon eclipse Ti-U User Manual

Chapter 1 Part Names
1.5 Dia Pillar Illuminator
19
1.5 Dia Pillar Illuminator
Ti series microscopes can be used with the following two types of dia pillar illuminators. The two dia pillar
illuminators differ in lamp rating (12V 100W or 6V 30W) and support different microscopy methods. Select
the dia pillar illuminator to suit your application.
1.5.1 TI-DH Dia Pillar Illuminator 100W
The TI-DH Dia Pillar Illuminator 100W is used with a separate lamphouse and condenser.
The following illustration shows the TI-DH Dia Pillar Illuminator 100W with the D-LH/LC Precentered
Lamphouse and the TI-C Condenser Turret (System Condenser) attached.
Figure 1-17 TI-DH Dia Pillar Illuminator 100W
(with Lamphouse and System Condenser)
1.5.2 TI-DS Dia Pillar Illuminator 30W
The TI-DS Dia Pillar Illuminator 30W has a built-in lamphouse, but requires a separate condenser.
The following illustration shows the TI-DS Dia Pillar Illuminator 30W with the ELWD-S Condenser.
EN
TI
-
DS 30W
6V
30W
HALOGEN
Figure 1-18 TI-DS Dia Pillar Illuminator 30W
(with ELWD-S Condenser)
D-LH/LC Precentered
Lamphouse LC
Requires TI-PS100W
power supply
Lamp cable
Condenser mount
(rotatable)
Condenser mount
rotation clamp scre
w
Condenser centering
knob
Condenser lens
TI-C System Condenser Turret
Condenser clamp scre
w
Field diaphragm knob
Pillar locking clamp knob
Filter sliders (both sides, 4 total)
Condenser refocusing
clamp
Condenser focus knobs
(both sides)
Condenser holder
(detachable)
Condenser holder clamp
screw
Field diaphragm slider
Lamphouse (6V 30W lamp, sold separately)
(Requires TE-PS30W or TE-PSE30 power
supply.)
Filter sliders (max. 3)
Dustproof slide
r
Device attachment screw holes (M4, x8)
Condenser mount
Condenser holde
r
ELWD-S Condense
r

Nikon eclipse Ti-U Specifications

General

Brand	Nikon
Model	eclipse Ti-U
Category	Microscope
Language	English