2726
GENERAL FUNCTIONS
This chapter explains the various modes of the F70/F70D
camera’s operation. Please review it thoroughly.
FILM SPEED SETTING MODE
The F70/F70D offers two ways to set film speed—automatic
film speed setting for DX-coded film and manual film speed
setting.
Automatic film speed setting for DX-coded
films
Usable film speed range for DX-coded film is ISO 25 to ISO
5000.
Make sure N is shown on the LCD panel. If not, hold FUNCTION
button and rotate command dial until the Function Area
indicator appears in the Film Speed Setting Mode Area and B
blinks. Then hold SET/! button and rotate command dial until
BN appears.
Manual film speed setting
Usable range for manual film speed setting is ISO 6 to 6400.
Hold FUNCTION button and rotate command dial until the
Function Area indicator appears in the Film Speed Setting
Mode Area and BN or B blinks. Then hold SET/! button
and rotate command dial until desired film speed is shown in
place of frame counter with B in the film Film Speed Setting
Mode Area.
• If DX-coded film is loaded but manual film speed setting is
selected, camera gives priority to the manually set ISO
number.
Automatic film speed
setting (with a DX-coded
film installed)
Manual film speed setting
To check ISO film speed setting
Hold FUNCTION button and rotate command dial until
the Function Area indicator appears in the Film Speed
Setting Mode Area and BN or B blinks. Then hold
SET/! button.
F70D I/MêÊçsâ¸í˘ 03.1.16 5:33 PM Page 26
To Next Page
Loading...
Need help?
General
