123122
Viewfinder illumination Automatically activates when
exposure meter is on
Film speed range ISO 25 to 5000 for DX-coded film;
ISO 6 to 6400 can be manually set
Film speed setting At DX position, automatically set to
ISO speed of DX-coded film used;
manual setting possible
Film loading Film automatically advances to first
frame when shutter release button is
depressed once
Film advance In single-frame and single-frame
silent rewind mode, film automatically
advances one frame when shutter is
released; in continuous high or
continuous low shooting mode,
shots are taken as long as shutter
release button is depressed; in
continuous high mode, shooting
speed is approx. 3.7 fps*, and in
continuous low approx. 2.0 fps*; in
Focus Tracking, approx. 3.1 fps for
Continuous Servo AF
* At shutter speeds of 1/250 sec. or higher in
the Manual exposure and Manual focus
modes.
Film rewind By pressing IN and Ps button; fast
rewind or silent rewind is selectable;
for fast rewind, rewind speed is
approx. 12 sec. with 36-exposure
film or approx. 9 sec. with 24-
exposure film, and for silent rewind
approx. 22 sec. with 36-exposure
film or approx. 18 sec. with 24-
exposure film
Frame counter Additive type; counts back while film
is being rewound
Self-timer Electronically controlled; blinking LED
indicates self-timer operation;
cancelable
Reflex mirror Automatic, instant-return type
Camera back Hinged back; unchangeable
Accessory shoe Standard ISO-type hot-shoe contact;
ready-light contact, TTL flash
contact, monitor contact; Mount
receptacle for SB-28/SB-28DX/
SB-27/SB-26/SB-25’s Posi-Mount
System is provided
Built-in TTL flash Guide number: 14m (at ISO 100);
flash coverage: 28mm or longer lens;
Red-Eye Reduction, TTL flash
control including 3D Multi-Sensor
Balanced Fill-Flash, Slow Sync and
Rear-Curtain Sync are possible
Flash synchronisation Up to 1/125 sec.
TTL Multi Sensor Five-segment multi sensor used for
TTL auto flash control
Automatic Balanced Possible when Nikkor or AI-P
Fill-Flash with TTL D-type Nikkor lens is used with built-
Multi Sensor in flash or Nikon Speedlight SB-28/
28DX, SB-27, SB-26, SB-25, SB-24,
SB-23, SB-22s, SB-22, SB-20, etc.
Monitor Pre-flash Built-in flash or Nikon Speedlight
SB-28/SB-28DX/SB-27/SB-26/SB-
25 fires Monitor Pre-flash(es) for TTL
multi sensor when D-type Nikkor or
AI-P Nikkor lens is used
Flash recommended Lights up when flash is
light recommended
Flash ready-light Lights up when flash is ready
Number of 36-exposure (24-exposure) film rolls per set of
fresh batteries
Power source Two CR123A-type lithium batteries
Battery power I for sufficient power; blinking
confirmation O indicates batteries are nearing
exhaustion; P indicates batteries
are just about exhausted; no
indication/symbol appears when
batteries are completely exhausted
or improperly installed
Date/time imprint Display mode: Year/Monty/Day, Day/
function Hour/Minute, No Imprint, Month/
(For F70D only) Day/Year and Day/Month/Year
Built-in clock: 24-hour type with
timing accuracy within ±90 seconds
a month; leap year adjustment until
2019
Usable film: ISO 32 to 3200 DX-
coded film
Power source: One 3V lithium
battery (CR2025 type)
Battery life: Approx. 3 years*
* May vary depending on extent of imprint
use, film speed in use, etc.
Dimensions (WxHxD) F70: Approx. 151 x 103 x 70mm
F70D: Approx. 151 x 103 x 71mm
Weight F70: Approx. 585 g
(without batteries) F70D: Approx. 600 g
All specifications apply when fresh CR123A-type batteries are used, at
normal temperature (20˚C).
Specifications and design are subject to change without notice.
Without flash
With flash for half
of all exposures
At 20˚C At –10˚C
Approx. 115 (150) Approx. 80 (100)
Approx. 25 (30) Approx. 20 (25)
* For autofocus operation using AF Zoom-Nikkor 28-70mm f/3.5-4.5 D lens
covering the full range from infinity (∞) to the closest distance and back to
infinity (∞) before each shot, in Continuous Servo AF mode with film advance
mode at CH and a shutter speed of 1/125 sec. or faster.
F70D I/MêÊçsâ¸í˘ 03.1.16 5:33 PM Page 122
To Next Page
Loading...
Need help?
General
