[ 65 ]
11
If you have changed your security code and don’t remember the new code,
contact your service provider. Once you have changed your security code,
the default setting is no longer valid.
• PROTECT YOUR PHONE WITH THE LOCK CODE
The lock code enables you to activate and deactivate your phone. When
the lock code is on, you cannot access most of your phone’s memory or
menu features. Also, you cannot make phone calls without first entering
the lock code.
Note: You can save an unlocked phone number and make calls to that
number without entering the lock code. Refer to “Store an
unlocked phone number” for more information.
With the lock code on, your phone locks when you switch it off. The next
time you switch your phone on, it asks you for a lock code when you press
either Names or Menu.
Note: If you enter an incorrect lock code five times in a row, your phone
prompts you for the security code.
• The default lock code is 1234.
• Nokia recommends that you change this code immediately.
Turn on the phone lock
1 Press Menu 4 > 3 > 2 > 1 (Settings > Security settings > Access
codes > Phone lock).
2 Enter the lock code and press OK.
3 Scroll to On and press OK again.
When your phone is locked, it might be possible to place a call to the
emergency number programmed into your phone, such as 911 or any other
official emergency number. You can either dial this emergency number or
press the emergency key 9 (if you have activated the 9 key to act as an
emergency key).
To Next Page
Loading...
Need help?
General
