445N
18
4.2. Service Menu
4.2.1. Access to Service Mode
Activate 9300K color temperat ure before you go to the service menu.
Activate the service mode always in 107.10 kHz/85 Hz (NCE791).
First switch OFF the monitor with power switch.
1) Push
button down.
2) While keeping
button down, switch ON the monitor.
3) Release
button when the power-- on indicator is ill uminated.
4) Press
button.
5) Monitor a sk password. Type the password (7711) with the
buttons.
6) Press
button.
Select the items in the Menu with the
or buttons. Push the button to open Geometry, Grey
Scale, Product Information or Memory Settings. Adjust each property with the
or buttons.
4.2.2. Geometry
Geometry submenu contains placement, size a nd shape adjustments.
GEOMETRY...
GREYSCALE...
SHARPNESS
PRODUCT INFORMATION . . .
MEMORY SETTINGS . . .
RASTER
WIDTH
HORIZONTAL CENTERING
HEIGHT
VERTICAL CENTERING
PINCUSHION
PINCUSHION BALANCE
TRAPEZOID
ORTHOGONALITY
S CORRECTION
C CORRECTION
E/W CORNER
TILT
EXIT
00: 1600x1200 85Hz
4.2.3. Grey Scale
This monitor has six preset tints. With tint numbers smaller than 3 the picture becomes reddish and
with tint numbers greater than 3 the picture turns blue.
Tint no 1 2 3 4 5 6 7
Colour Temperature 5000K 6000K 6500K 7000K 8000K 9300K 10000K
The grey scale adj ustment affects directly tint number 6 (9300K) only. Other tints are derived auto-
matically from 9300K colour temperat ure.
To Next Page
Loading...
Need help?
General
