Settings
55 Copyright © 2006 Nokia. All rights reserved.
USB data cable for the
synchronization, and start the
synchronization from the PC.
Synchronize from a server
To use a remote Internet server, you
must subscribe to a synchronization
service. For more information and
the settings required for this service,
contact your service provider. You
may receive the settings as a
configuration message. See
”Configuration settings service”
p. 11 and ”Configuration” p. 57.
If you have saved data on the remote
Internet server, to synchronize your
phone, start the synchronization
from your phone.
Select Menu > Settings >
Connectivity > Data transfer >
Server sync. Depending on the
settings, select Initialising sync or
Initialising copy.
Synchronizing for the first time or
after an interrupted synchronization
may take up to 30 minutes to
complete, if the contacts or calendar
are full.
USB data cable
You can use the USB data cable to
transfer data between the phone
and a compatible PC or a printer
supporting PictBridge. You can also
use the USB data cable with Nokia
PC Suite.
To activate the phone for data
transfer or picture printing, connect
the data cable; when the phone
displays USB data cable connected.
Select mode., select OK. Select from
the following modes:
Default mode — to use the cable for
PC Suite
Printing — to print pictures directly
from the phone using a compatible
printer
To change the USB mode, select
Menu > Settings > Connectivity >
USB data cable > Default mode, or
Printing.
■ Call
Select Menu > Settings > Call and
from the following options:
Call divert (network service) — to
divert your incoming calls. You may
not be able to divert your call, if
some call barring functions are
active. See Call barring service in
”Security” p. 58.
Anykey answer > On — to answer an
incoming call, briefly press any key,
except the end key, the camera
release key and the left and right
selection keys
Nokia_6111_China_UG_HKEN.fm Page 55 Thursday, October 25, 2007 2:54 PM
To Next Page
Loading...
Need help?
General
