EasyManuals Logo
Home>Notifier>Fire Alarms>ACM-24AT

Notifier ACM-24AT Installation Manual

Notifier ACM-24AT
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Product Overview
10 PN 15842:K 7/23/2002
1.1.3 ACM-16AT, ACM-32A, Expanders, and Variations
The Annunciator Control System (ACS) series provides Notifier fire alarm
control panels* with up to 32 remote serially connected annunciators, each with
a capacity of 64 points, for a total capacity of 2048 points. There are two basic
controller modules, each with its own expander module. Individual fire alarm
control panels
*
offer different methods of identifying annunciator points:
NFS-3030. Annunciator points are completely programmable and can be
employed to annunciate and manually control common system, voice or
telephone circuits. (Note: User-defined points can be defined by using
VeriFire™ software; see your control panel manual.*)
NFS-640, AFC-600. Annunciator points are programmable by group or
by point. (Note: User-defined points can be defined by using VeriFire™
software; see your control panel manual.)
AM2020, AFP1010. Annunciator points are completely programmable
and can be employed to annunciate and manually control common
system, voice or telephone circuits.
AFP-100, AFP-200, AFP-300, AFP-400. Annunciator points are
programmable by group. (Note: User-defined points can be defined for
AFP-300/AFP-400 systems by using VeriFire™ software; see your
control panel manual.*)
System 5000, System 2500, System 500. Annunciator points directly
follow the circuit arrangement of modules installed in the cabinet.
The Network Control Annunciator (NCA) and Intelligent Network Annunciator
(INA) can employ these annunciators on the EIA-485 interface. Refer to the
NCA and INA manuals* for further details.
1.2 Related Documentation
The table below provides a list of document sources (manuals) containing
additional information regarding the fire alarm control panels and components
that ACS annunciators can be connected to. The NOTIFIER document (DOC-
NOT) chart provides the current document revision.
* Section 1.2 “Related Documentation” lists part numbers for manuals of compatible
equipment such as control panels.
Continued on next page...

Table of Contents

Other manuals for Notifier ACM-24AT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Notifier ACM-24AT and is the answer not in the manual?

Notifier ACM-24AT Specifications

General IconGeneral
BrandNotifier
ModelACM-24AT
CategoryFire Alarms
LanguageEnglish

Related product manuals