Product Overview
14 PN 15842:K 7/23/2002
24AT, ACM-48A, or ACM-32A series. Expander LED colors need not match
the control module LED colors for the expander to operate.
AEM-16ATY
*
. Same as the AEM-16AT but all LEDs are yellow (yellow On/
Alarm and yellow Trouble).
AEM-16ATG
*
. Same as the AEM-16AT, but On/Alarm LEDs are green (green
On/Alarm and yellow Trouble).
2.4 ACM-32A Series
2.4.1 Control Modules
ACM-32A
*
. The Annunciator Control Module-
32A contains 32 red point active LEDs, a system
trouble LED, an On-line/Power LED, and a local
piezo sounder with a silence/acknowledge switch
for audible indication of alarm and trouble
conditions at each annunciator. Height = 8.375"
(21.27 cm), Width = 4.375" (11.11 cm). In Canada
this module must be used to annunciate the fire
alarm input points/zones only.
ACM-32AG
*
. Same as the ACM-32A, but On/
Alarm LEDs are green (green On/Alarm and
yellow Trouble). In Canada this module may be
used to annunciate notification appliance circuit activation or other output
circuit/zone activation.
ACM-32AY
*
. Same as the ACM-32A but with all LEDs yellow (yellow On/
Alarm and yellow Trouble). In Canada this module must be used to annunciate
supervisory and burglary signals from associated points/zones.
2.4.2 Expander Modules
AEM-32A
*
. The Annunciator Expander Module-32A expands the ACM-32A
series by 32 system points. The AEM-32A (with red LEDs) is identical in
frontal appearance to the ACM-32A. One expander module can be supported by
an ACM-32A, ACM-32AG, or ACM-32AY, providing a maximum of 64 points.
Height = 8.375" (21.27 cm), Width = 4.375" (11.11 cm).
Note: The AEM-32A cannot be used to expand the ACM-24AT, ACM-48A, or
ACM-32A series. Expander LED colors need not match the control module
LED colors for the expander to operate.
AEM-32Y
*
. Same as the AEM-32A but with all LEDs yellow (yellow
On/Alarm and yellow Trouble).
AEM-32G
*
. Same as the AEM-32A, but On/Alarm LEDs are green (green
On/Alarm and yellow Trouble).
* In Canada the color red must be used to indicate active alarm inputs. Yellow indicates
supervisory, burglary or trouble signals. Green indicates the presence of power, or an
activated output.
acm-32A-face3.cdr
To Next Page
Loading...
Need help?
General
