Notifier NOTI-FIRE-NET User Manual

NFN Web Server User’s Manual PN 51990:A2 12/02/03 19
2.9 PC TO PC CONNECTION
This connects the NFN Web Server to a PC that has one of the following programming utilities installed on it:
• Serial Configuration Tool (P/N NWS-SW)
• Veri•Fire™ Tools (P/N VERIFIRE-TCD)
This connection is used when configuring the Web Server.
Figure 2.9-1: PC to PC Serial Connection
To EIA-232 port on
NFN Web Server PC
Board
To EIA-232 port on
PC (or laptop)
NOTES: Cable must be
supplied by customer and must
be a null-modem cable.
!
2.8 ETHERNET NETWORK CONNECTION
This connects the NFN Web Server to the Internet or Intranet. A PNET-1 surge suppressor must be used between the
Web Server PC board and the network. Using the RJ45 cable, plug one end into the PC board and the other into the
square end of the PNET-1. Then, connect another RJ45 cable from the PNET-1 out to the network.
The NFN Web Server can be used as a web-based gateway for communication between NOTI•FIRE•NET™ and
Veri•Fire™ Tools. The Ethernet port on the Web Server computer connects to the Ethernet port on the Veri•Fire™
Tools computer. For details on using Veri•Fire™ Tools with the NFN Web Server, consult the Veri•Fire™ Tools online
help.
Figure 2.8-1: Ethernet Connection
NFN Web Server PC Board
NFN Web Server
to PNET-1
To Internet or Intranet
PNET-1 surge
suppressor
www.PDF-Zoo.com

Notifier NOTI-FIRE-NET Specifications

General

Brand	Notifier
Model	NOTI-FIRE-NET
Category	Control Systems
Language	English