27
27
G
B
7.1 Replacing the fuse
The vehicle connector 5 has a fuse. If the fuse is
defective, you can obtain new fuses of the
Ø 6.3x32, 10 A type from specialist dealers.
To change the fuse, unscrew the knurled nut on
the end of the vehicle connector and remove the
defective fuse.
Replace the defective fuse with a new fuse and
put the vehicle connector back together as
shown.
8. Technical data
Power supply:
– "Home" mode 220-240 V
~ / 50-60 Hz
– "Car" mode 12 V DC,
Power output:
– "Home" mode 500 W
– "Car" mode 100 W
Degree of protection: I
Protection class: IPX0
Designation for vehicle adapter: SAE-J563
Fuse for vehicle adapter: 10 A Typ Ø6, 3x32
9. Disposal
Packaging
When you wish to dispose of the packaging,
please observe the relevant environmental
regulations for your country.
Equipment
The symbol with the crossed-out
rubbish bin on wheels means that
within the European Union, the product
must be disposed of to a sorted
rubbish collection. This applies to the
product and all accessories which are marked
with this symbol. Marked products must not be
disposed of via the regular domestic waste but
must be handed in to a recycling centre for
electrical or electronic devices. Recycling helps
to reduce the use of raw materials and to relieve
the environment. It is therefore imperative that
you follow the disposal regulations applicable in
your country.
To Next Page
Loading...
Need help?
General
