Nvidia DGX H100 User Manual

NVIDIA DGX H100 User Guide
2. Run a basic system check.
sudo nvsm show health
3. Verify that the output summary shows that all checks are Healthy and that the overall system
status is Healthy.
4. Verify that Docker is installed by viewing the installed Docker version.
sudo docker --version
On success, the command returns the version as Docker version xx.yy.zz, where the actual
version may dier depending on the specic release of the DGX OS Server software.
5. Verify connection to the NVIDIA repository and that the NVIDIA Driver is installed.
sudo docker run --gpus all --rm nvcr.io∕nvidia∕cuda:12.1.1-ubuntu22.04 nvidia-smi
The preceding command pulls the nvidia∕cuda container image layer by layer, then runs the
nvidia-smi
command.
When complete, the output shows the NVIDIA Driver version and a description of each installed
GPU.
For more information, refer to Containers For Deep Learning Frameworks User Guide.
4.6. Running the Pre-ight Test
Instructions for running the DGX stress test.
NVIDIA recommends running the pre-ight stress test before putting a system into a production envi-
ronment or after servicing. You can specify running the test on the GPUs, CPU, memory, and storage,
and also specify the duration of the tests.
To run the tests, use NVSM.
Syntax
sudo nvsm stress-test [--usage] [--force] [--no-prompt] [<test>...] [DURATION]
For help on running the test, issue the following.
sudo nvsm stress-test --usage
4.6. Running the Pre-ight Test 29

Nvidia DGX H100 Specifications

General

Brand	Nvidia
Model	DGX H100
Category	Computer Hardware
Language	English