EasyManuals Logo
Home>Nvidia>Switch>Spectrum-4 SN5000 2U

Nvidia Spectrum-4 SN5000 2U User Manual

Nvidia Spectrum-4 SN5000 2U
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
29
System Status LED
The LED in the red oval shows the system’s status.
Front (Ports S
ide):
*The figure is provided for Illustration purposes only. The design may slightly vary in different systems.
System Status LED Assignments
LED Behavior Description Action Required
Solid Green The system is up and running normally. N/A
Flashing Green The system is booting up. Wait up to five minutes for the end of
the booting process.
Solid Amber An error has occurred. For example,
corrupted firmware, system is
overheated etc..
In case the System Status LED shows
amber five minutes after starting the
system, refer to Troubleshooting
for
further instructions.
Fan Status LED
Fan Status LED - Front and Rear Sides
Both of the LEDs in the red ovals show the fans’ status.
*The figures are provided for Illustration purposes only. The design may slightly vary in different systems.
Front Panel LED:
It may take up to five minutes to boot the system. If the System Status LED shows amber
after five minutes, unplug the system and call your NVIDIA representative for assistance.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nvidia Spectrum-4 SN5000 2U and is the answer not in the manual?

Nvidia Spectrum-4 SN5000 2U Specifications

General IconGeneral
BrandNvidia
ModelSpectrum-4 SN5000 2U
CategorySwitch
LanguageEnglish

Related product manuals