Instruction Manual Easygraph
Page 11
6.6.3 OCULUS – Bootloader
After having connected the Easygraph correctly to
the PC, the operation system shows that a new
instrument “OCULUS – Bootloader” has been found
and that it is necessary to install a driver:
Please chose the point “Install from a list or
specific location (Advanced)” and click the button
“Next >”.
In the following window please type in the correct
position of the driver.
Therefore please deactivate the entry “Search
removable media (floppy, CD-ROM...” and activate
the entry “Include this location in the search:”.
Please chose as a path “X:\driver”, in which you
substitute “X“ with the capital letter of your CD ROM
drive. Please insert the OCULUS Easygraph
installation-CD and click on the button “Next >”
After a short time the operation system is searching
for the driver possibly a window appears with the
remark that the Windows logo test has not been
passed.
Then click on the button “Continue Anyway”
Now the driver is being installed.
And after successful copying this is confirmed once
more by the operation system.
It is not necessary to re-boot the system.
To Next Page
Loading...
Need help?
General
