Oki B4100 User Manual

OPERATOR PANELS > 18
> Printing the demo and menu pages.
> Printing any data held in the buffer after printing has been
cancelled.
The other functions of the control button are activated after turning the
printer off line then pressing and holding the switch for at least five
seconds before releasing. The other functions are as follows:
> Printing a cleaning page.
> Resetting the printer and clearing the buffer after printing has
been cancelled.
STATUS MONITOR
After installing the printer driver software, the Status Monitor is then
installed to indicate what is happening to the printer when it is being used.
(See the chapter entitled “Printer Drivers.”) This Status Monitor is also
used to control and change the various printer settings.
Using the Printer Status Monitor
Viewing the status of the printer, and viewing or changing the printer
settings are carried out as follows:
NOTE
Demo and menu pages can also be printed using the printer Status Monitor.
NOTE
A cleaning page can also be printed using the printer Status Monitor.
NOTE
To reset the printer to the factory default settings, press the control button
and hold it down while the printer is turned on. The LED indicators blink
when the printer has reset to the default settings.

Oki B4100 Specifications

Performance

print speed	19 pages per minute
CPU	200 MHz
time to first page	6.0 seconds
print resolution	1200 x 600 dpi
duty cycle	15, 000 pages per month

Memory

standard RAM	8 MB
maximum RAM	8 MB

Paper Handling

standard paper input	250-sheet Letter/Legal/Universal tray
paper size minimum	3.4" x 5.5"
paper size maximum	8.5" x 14"

Weight and Dimensions

size (WxDxH)	14" x 15.6" x 7.9"
size (WxDxH in cm)	35.5 cm x 39.5 cm x 20 cm
weight	22 lb. (10.0 kg)