B4400/B4600 User’s Guide – Operation > 55
PCL
EMULATION
The tabs available are the Setup Tab, the Job Options Tab and
the Image Tab.
Setup Tab.
1. Paper size should be the same as the page size of your
document (unless you wish to scale the printout to fit
another size), and should also be the same as the size of
paper you will feed into the printer.
2. You can choose the source of the paper to feed, which
may be Tray 1 (the standard paper tray), Manual Feed
Tray, Tray 2 (if you have the optional second paper tray
installed) or the optional Multi Purpose feeder. You can
also click on the appropriate part of the screen graphic to
select your preferred tray.
If you select manual, the Weight selection box becomes
visible. You can leave the setting at Printer Setting or
select as required.
3. A variety of document finishing options can be selected,
such as normal one page per sheet, or N-up (where N can
be 2 or 4) for printing scaled down pages at more than
one page per sheet.
4
2
3
5
6
1
To Next Page
Loading...
Need help?
General
