B6250 User’s Guide> 125
For the network to work properly, the following settings must be
configured on the web browser.
For Netscape Communicator
• Settings that enable Java Script are selected.
• To compare the document in the cache and the document on
the network, either the setting that compares them every
session or the setting that compares them every time is
selected.
For Internet Explorer
• Settings that enable active script are selected for the security
level.
• For newer versions of stored pages, either the setting that
displays it or the setting that checks it every time Internet
Explorer starts is selected.
Setting the Printer
To use Printer Web Page, the IP address of this printer must be set
and the printer web page [Web] enable under the [Network] menu.
When [Printer Web Page] is disabled, set it to [Enable] on the control
panel.
Procedure
To use Printer Web Page, follow the procedures below to activate the
web browser.
1. Activate the computer and web browser.
2. At the address column of the web browser, enter the IP
address or URL of the printer and then press the <Enter>
key.
The [Status] screen appears.
• Example of an IP address entry
•Example of a URL entry
To Next Page
Loading...
Need help?
General
